Duplo DBM-120 Instrukcja instalacji - Strona 10
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Maszyny składające Duplo DBM-120. Duplo DBM-120 13 stron. Connecting kit
model: dc-6000s;dc-8000s 2;
dc-10000s
Również dla Duplo DBM-120: Instrukcja instalacji (12 strony)
Drukuj stronę
2-5. Setting the DIP Switch of Suction Collator
1
Push down Pin 6 of DIP switch 2 on the control panel of Tower A of suction collator (to the
number side).
1 2 3 4 5 6 7 8
DIP switch 2
NOTE
: Be sure to turn off the power of the DBM-120 and suction collator and disconnect the power plug from the
outlet first before starting the work.
1
Temporarily secure the connecting plate
provided to the DBM-120 cabinet.
<< Parts to be used >>
Connecting plate w ............................................ 1
Screw (MSKW5 × 10) e ................................... 2
2
Temporarily secure the connecting plate
to the LU-HM.
<< Parts to be used >>
Screw (MSKW5 × 10) e ................................... 2
3
Tighten the screws temporarily secured in step 1, and secure the connecting plate.
OPEN
2-6. Connecting the Suction Collator
2. INSTALLING PROCEDURE
DIP switch 1
st a rt
st o p
∗ This shows the DC-10000S.
DBM-120
DBM-120 cabinet
Connecting plate
Screws
Connecting plate
DIP switch 2
DIP switch 4
DIP switch 3
Screws
LU-HM
7