Audiodesign PAMX3.122 Instrukcja obsługi - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Mikser muzyczny Audiodesign PAMX3.122. Audiodesign PAMX3.122 8 stron. Professional mixer

PROFESSIONAL MIXER
CONTROL PANEL
+12
+6
0
10
6
12
63Hz
125Hz
250Hz
500Hz
DSP EFFECTS PROCESSOR
11
11
MUTE
9
10
12
EFF TO
13
MAIN
SUB
AUX1/2
AUX3/4
17
EFF SEND
PFL
EFF LEVEL
13
12
14
0
10
0
10
14
CLIP
CLIP
CLIP
CLIP
+6
+6
+6
+6
16
0
0
0
0
-20
-20
-20
-20
10
10
10
10
15
0
0
0
0
15
-10
-10
-10
-10
-15
-15
-15
-15
-20
-20
-20
-20
-30
-30
-30
-30
-50
-50
-50
-50
16
AUX1
AUX2
AUX3
AUX4
17
PAGE 8
Serie
9
State display of inner effector:
This double 7-segment LED display is used for indicating the
work state of the inner effector, and the corresponding effect
are shown as blow.
Buttons for choosing the state:
These two buttons are used for selecting the states of the
inner effector.
MUTE:
This button is used for muting the effect. When you press and
hold the button, the display will flash and the effect will be
muted until you loose the button.
EFF SEND:
This knob is used for controlling the signal level feed to the
inner effector from all input channels and also controlling the
signal level output from the EFF SEND sockets.
EFF LEVEL:
This knob is used for controlling volume of the signal level
from the output of the inner effector.
PFL :
This switch allows you to monitor the output signal of the inner
effector, the signal is sampled in front of the EFF fader, so it
has nothing to do with these fader position.
AUX1~4 SEND:
These four faders are used for controlling the output level
from all input channel sent to the AUX1~4 SEND phone
jacks respectively.
Level meter for AUX output:
These 4 level meters indicate the signal level of the
AUX1~AUX4 output
EFF To EFFECT switch:
Press these 4 switch, can feed the effect signal to MAIN
OUT, SUB OUT, AUX OUT1/2 and AUX OUT3/4 respectively.
PAMX3
POFESSIONAL MIXER
1KHz
2KHz
OUTPUT LEVEL INDICATOR
CLIP
+10
+7
+4
+2
19
-2
-4
-7
-10
-20
-30
MAIN L
MAIN
2TK IN
24
0
10
MAIN
10
25
-10
-15
-20
-30
-50
L
PROFESSIONAL MIXER
18
Graphic equalizer and EQ ON switch:
This 9-band stereo graphic equalizer will be inserted in the
main output stage, when the EQ ON button is pressed.
+12
EQ
+6
18
0
Level meter for
19
6
ON
This level meter indicates the signal level of the stereo
12
main output (Left, Right and PFL). When a PFL button is
4KHz
8KHz
16KHz
pressed, PFL LED light, the Right channel level indicator
turned into input signal level indicator of this channel.
CLIP
+10
20
Level meter for SUB1,SUB2 group output
+7
+4
This level meter indicates the signal level of the group
+2
output (SUB1 and SUB2).
0
0
20
-2
-4
-7
21
PHONES SELECTOR :
-10
When no channel PFL switch is pressed, these 4 buttons
-20
choose whitch signal feed to headphone monitor. When
-30
one channel PFL switch is pressed, you can hear the
MAIN R/PFL
SUB 1
SUB 2
pressed channel signal sampled in front of this channel
PFL
fader.
PHONES SELECTOR
SUB
AUX1/2
AUX3/4
21
AUX RET
PHONES
22
PHONES volume control:
22
This knob controls the volume of the headphones
0
10
0
10
23
connected to the headphone jack.
SUB
10
AUX RET :
23
This knob control the input level from an external
processor as external effector etc. connected to AUX
0
0
RETURN. The signal will be feed to stereo main bus and
sub bus.
26
-10
-15
24
2TK IN:
-20
This knob used to control the input signal level from 2TK IN
-30
sockets to main stereo bus and SUB group output.
-50
1
2
R
25
Stereo L/R master control:
These two slide faders are used for adjusting the final
output level sent to the stereo output sockets.
26
SUB1, SUB2 group output control:
These two slide faders are used for adjusting the final
output level sent to the group output sockets.
PAMX3
Serie
CONTROL PANEL
L,R/PFL
output:
PAGE 9