Freedom Innovations Kinterra Instrukcje użytkowania - Strona 4
Przeglądaj online lub pobierz pdf Instrukcje użytkowania dla Sprzęt medyczny Freedom Innovations Kinterra. Freedom Innovations Kinterra 5 stron.
Fitting Tips & Troubleshooting
Spectra™ Sock
Foot Shell
Kinterra™ System
Maintenance
Warnings
Instructions for Use (R-720-175, Rev. D)
The following fitting tips will help to optimize Kinterra's performance. If the proposed
solutions do not result in a satisfactory outcome, please contact Freedom Innovations
Technical Services for further support.
Foot too stiff / too soft
As a first step, weigh the patient to confirm current body weight. Assess true impact level
(low or moderate) and review the Kinterra-specific category selection chart to assure the
proper foot stiffness has been selected.
Heel is too soft
Symptoms:
• Sinking at heel strike, 'crushing' the heel
• Difficult to progress the step from heel strike to mid stance
• User feels they are walking up hill or forefoot feels too long
Solutions:
• Check A-P alignment; ensure foot is not positioned too far anterior
• Increase the plantar flexion 'PF' resistance
• Temporarily apply the provided rubber heel stiffening bumpers to the heel in the
location indicated on the bumper package using the pre-applied adhesive. This will
increase stiffness one category level. Placement anterior to this will further stiffen the
heel and a more posterior placement will stiffen less than a full category. For permanent
placement, clean off the pre-applied adhesive with Acetone, and adhere bumpers using
Super Glue (cyanoacrylate).
If the proposed solutions do not result in a satisfactory outcome, please contact Freedom
Innovations Technical Services for further support. (888) 818-6777 or (949) 672-0032
A Spectra™ sock is provided to protect the foot shell and minimize noise. Spectra™
socks must be replaced at intervals appropriate to the user's activity level. Failure to
inspect and replace the Spectra™ socks may prematurely wear the foot module, and
may void the warranty.
When removing or installing the foot shell, follow instructions in the foot shell IFU to
prevent damage to the foot module.
Sizes: 22-31 cm
Average Build Height: 130 mm / 5.15 in
User Weight Rating: 124 kg (275 lbs)
Heel Height: 10 mm (3/8 in)
Connector: Male pyramid
Warranty: 36 months (shell 6 months)
• Inspect the foot module every six months. If the user is more active, more frequent
inspection may necessary. Service as necessary. Replace Spectra™ sock and/or foot
shell if worn to prevent damage to the graphite components.
• The foot module may be cleaned and/or disinfected with soap and warm water.
Failure to adhere to the guidelines of the Instructions for Use will void the warranty.
• Advise users to practice driving with the Kinterra in a safe place to ensure they adjust
to the plantar and dorsiflexion movement provided by the ankle.
• Advise users to practice sitting and standing with the Kinterra in a safe place to ensure
they adjust to the plantar and dorsiflexion movement provided by the ankle.
English