AudioEngine S6 Konfiguracja

Przeglądaj online lub pobierz pdf Konfiguracja dla Subwoofer AudioEngine S6. AudioEngine S6 2 stron. Wireless subwoofer
Również dla AudioEngine S6: Skrócona instrukcja obsługi (17 strony)

Drukuj stronę
S6 Wireless Subwoofer Setup
The W Wireless Audio Adapter, which is part of the S Wireless Subwoofer system, will allow you to send music wirelessly from any
music system with an audio output to the S Subwoofer.
Here are the two most common setups to make your S subwoofer wireless using the Audioengine W wireless adapter kit.
Music System to S6 Sub
using mini-jack audio output
W3
power
supply
1
Connect the W power supply to the W Sender and plug the W
power supply into a functioning AC power outlet.
2
Connect a mini-jack audio cable from the W Wireless Sender to
your music system audio out or subwoofer output.
Powered Speakers or Stereo Receiver to S6 Sub
using RCA audio outputs
W3
power
supply
1
Connect the W power supply to the W Sender and plug the W
power supply into a functioning AC power outlet.
2
If your powered speakers or AV receiver has RCA-style audio
outputs or sub outputs, connect the included RCA adapter Y
cable to the W Sender.
3
Connect an RCA cable included with your powered speakers or AV
receiver between the RCA Y adapter cable and your music source
subwoofer out.
Subwoofer or
audio output
3.5mm
mini-jack
output
2
W3
Sender
1
Subwoofer or
audio output
Right
Left/LFE
3
W3
Sender
2
1
Wireless receiver connection to S6 Sub
using mini-jack audio input
4
W3 Receiver
4
Connect the included mini-jack cable from the W
Receiver to audio input on the rear panel of the S
subwoofer.
5
Power on the S subwoofer.
The status indicators on the W Sender and Receiver will
both blink briefly and will then go solid, indicating they
are paired and ready to play your music.
For instructions on setting up the S Subwoofer, refer to
the S Quickstart Guide.
Need Help
Visit: audioengine.com support
Email us: support audioengineusa.com
Call us:
-
-
Subwoofer input
Input
Right
Left/LFE
Input
5VDC
Input
Right
Left/LFE
Input
Volume
Min
Max
5VDC
Crossover
S6
50Hz
130Hz
Phase
0
180
Standby
Auto
O
on
Power on - green
Standby - amber
On
5
O
100-240V
~50/60Hz 1.5A
S Subwoofer Setup
V -