Freedom Innovations iQ Instrukcja obsługi - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odkurzacz Freedom Innovations iQ. Freedom Innovations iQ 11 stron. Vacuum device
Również dla Freedom Innovations iQ: Podręcznik użytkownika (10 strony), Instrukcja konfiguracji (16 strony)
Drukuj stronęBasic Operations
User Panel
To manually control iQ Vacuum, use the button and LED indicator on
the top of iQ Vacuum. The button is used as both a power switch and
for limited interaction with iQ Vacuum when a mobile device is not
available or desired.
Turn On
Don the prosthesis prior to turning on. Press and hold the center
button until the indicator light turns green, then release. A series of
green flashes follow to report the battery charge.
Indicator Light
Charge Level
4 Green Flashes
75% – 100%
3 Green Flashes
50% – 75%
2 Green Flashes
25% – 50%
1 Green Flash
0% – 25%
The amber light turns on after battery report flashes, and indicates
that the pump is pulling vacuum to donning level.
Turn Off
Press and hold the center button until the indicator light turns green,
then release. A green flash followed by an amber LED will indicate the
unit is off. The amber LED remains lit while a relief valve is held open
to aid in doffing the prosthesis.
Battery Life
2 – 3 days under normal operating conditions.
Battery Level
A quick press of the button (while on or off) will display the battery
level according to the pattern above.
10
Power / Function Button
Battery / Function Indicator
Freedom Innovations |
iQ Vacuum
| Instructions for Use
Reset
While plugged into its charger, press and hold the button for
15 seconds. The indicator light will turn amber when ready to reset.
Release the button and a flashing red light will indicate that the
firmware is resetting. If you decide not to reset, simply continue
pressing the button until the amber light turns off.
WARNING:
A reset will erase all memory and restore factory settings.
Warning Indicators
The indicator will glow amber steadily under the following conditions:
•
Battery Low
•
Socket Seal Leak
•
Blockage of Vacuum
•
Unable to Reach Donning Vacuum Level
Critical Error Indicators
The indicator will flash red quickly for 10 seconds and the unit will turn
off automatically under the following conditions:
•
Battery Too Low to Continue
•
Unresolved Socket Seal Leak
•
Continuing Blockage of Vacuum
Normal Function
iQ Vacuum will initially start up in "Donning Mode" and will apply a
slight vacuum to the prosthetic socket. Intelligent diagnostics will test
the quality of the socket seal and then will enter "Auto Mode" where it
will automatically increase and decrease the vacuum level based on the
activity level of the user. If it is unable to achieve the donning level in a
short time, the warning indicator will illuminate amber. Check for leaks
in the socket or tubing connections and don the prosthesis again.
Battery Charging
To charge the battery:
•
Insert micro USB cable connector into port on side of iQ Vacuum.
•
Connect to the wall power supply provided with iQ Vacuum.
The indicator will slowly pulse green while charging.
•
Once the device is completely charged, the indicator light will
turn solid green.
CAUTION:
Use only the wall power supply provided with iQ Vacuum
for charging its battery.
11