AudioEngine W3 Instrukcja konfiguracji - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja konfiguracji dla Adapter AudioEngine W3. AudioEngine W3 4 stron. Premium wireless audio adapter
Również dla AudioEngine W3: Instrukcja konfiguracji (1 strony)

Drukuj stronę

Configurations

Shown here are examples of some common W3 wireless

configurations and setup instructions for each:

Computer USB Audio to Powered Speakers

[jJ

Sender

Receiver

Note: If using Audioengine S+ (AS+) powered speakers the

AS+ USB power port can be used to power the W3 Receiver.

1) Connect the W3 Sender to your computer's USB port.

2) For PC wait for the USB audio connection to be detected.

For Mac OS, open System Preferences/Sound, select

Output, then select "Audioengine W3".

3) Connect the W3 Receiver to the included power

adapter and plug the adapter into an AC power outlet.

4) Connect a mini-jack or RCA audio cable from the W3

Receiver to your powered speaker's audio input.

S) The status indicators on the Sender and Receiver will

blink briefly and then go solid, indicating that they

are linked.

6) Play your music!

Note: If using W3 for USB computer audio there is no need

to connect an audio cable from the W3 Sender to your

computer's headphone output. Doing so may create a

ground loop resulting in unwanted noise.

Computer to any Audio System

Sender

1 ) Follow steps 1 thru 3 above.

2) Connect the included RCA "Y" adapter interface

cabletotheW3 Receiver audio output.

3) Connect an RCA cable (not included) from your

stereo receiver's RCA inputs to the RCA "Y" adapter.

4) The status indicators on the Sender and Receiver will

blink briefly and then go solid, indicating that they

are linked.

S) Play your music!

iDevice to Powered Speakers

Receiver

Note: If you have Audioengine S+ powered speakers, you

may use the built-in USB power/charge port on the AS+ to

power the W3 Receiver. Otherwise, you can use an iPhone

charger or purchase extra Audioengine power adapters.

1) Connect the included mini-jack cable from your

iDevice to the W3 Sender audio input.

2) Connect the W3 Sender to the included power

adapter and plug the adapter into an AC outlet.

3) Connect the included mini-jack cable from the W3

Receiver output to the powered speaker's audio input.

4) Connect the W3 Receiver to another power adapter

(1 power adapter is included, others sold separately).

S) Plug the power adapter into an AC outlet.

6) The status indicators on the Sender and Receiver

will blink briefly and then go solid, indicating that

they are linked.

7) Play your music!

Wireless Rear Speakers and/or Subwoofer

Sender

Receiver

1) Connect the W3 Sender and W 3 Receiver to power

adapters and plug each into an AC power outlet.

2) Connect your surround sound AV receiver's rear channel

(or subwoofer) RCA outputs to the W3 Sender input.

3) Connect the W3 Receiver to your powered rear

channel speakers (or subwoofer).

4) The status indicators on the Sender and Receiver will

blink briefly and then go solid, indicating that they

are linked.

S) Play your music!

Note: To set up wireless rear channel speakers AND a wire-

less subwoofer from your surround system, simply add

another W3 Sender/Receiver pair and repeat the previous

instructions.