Daniamant Dan W3-1 Instrukcja instalacji i konserwacji - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja instalacji i konserwacji dla Sprzęt oświetleniowy Daniamant Dan W3-1. Daniamant Dan W3-1 12 stron. Lifejacket light
Drukuj stronęInstallation
The Dan W3-2 is for use on all types of lifejackets.
The Dan W3-2 is supplied with a fixing clip. The clip is intended to be placed
behind a strip of lifejacket material or reflective tape; the light is secured by
pressing it into the clip.
p/n. 1950
p/n. 1952
Light and fixing clip (part no.1950 for grey standard clip, for 1" webbing + part no. 1952 Clips 2, for 2"
It is the responsibility of the lifejacket manufacturer to ensure that the light is
attached securely and is in the correct position on the lifejacket to provide
maximum visibility when the wearer is in the water.
Operation
The DAN W3-2 is switched on automatically when the sensor is immersed in
water, and can be switched off by pressing the on/off button for one second.
The light can also be activated and deactivated manually by pressing the on/off
button for one second.
The sensor on the cable can be tested by a metal clip.
Figure depicts the Sensor Switch and the Manual ON/OFF Button
webbing) separated to show material path
Sensor
Switch
ON/OFF
Button