AUDIOKULTURA ISKRA1 Instrukcja obsługi - Strona 2
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Stopnie gramofonowe AUDIOKULTURA ISKRA1. AUDIOKULTURA ISKRA1 9 stron. Highly accurate mm/mc phono stage
Drukuj stronęDear user / music lover,
thank you for buying Iskra1 preamplifier.
I assure you that the device you are holding in your hands was produced by
hand, and the guy who made it drank some coffee at that time, listened to
some good records (using the ISKRA phono stage, ) and was in no hurry.
There was no need to hurry.
I hope that thanks to this device you will discover your vinyl again!
Before you get it, read the instructions carefully - only the correct configuration
will provide you with perfect and balanced sound, which is one of the
advantages of this phono stage.
Should any part of this document or the operation of the Iskra1
not be clear for you, please contact us! We will help you in configuration.
– the device should stand on a flat surface,
– do not put anything on the device,
– do not place any liquids in the vicinity of the device, spillage may cause
a short circuit and damage the device,
– try to use the shortest cables, both input and output,
the highest possible quality
ISKRA1 phono stage,
external, automatic power supply 110V-240V
earth-wire,
user's manual
First of all, you need to know what are the parameters of the cartridge you are
using. You can check it on the producer's website, you can ask the dealer who
sold you the cartridge, you can ask us. Two parametres are important here:
capacity (recommended load capacitance), given in pF and the load of the
cartridge (recommended load resistance), given in Ohm or kOhm.
You should also know the capacity of the cable that connects the turntable to
the Iskra1. At this point, let's assume that is 60pF.
Iskra1 manual, site no.2/9 Feel free to contact us if you have any questions ([email protected])
PRECAUTIONS:
WHAT YOU WILL FIND IN THE BOX?
CONFIGURATION, PART1
DIPSWITCH 8. LOADING & CAPACITORS
INTRO
(US, GB & EU, other plugs on request)