AUDIOLINE TEL5-K Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Telefon AUDIOLINE TEL5-K. AUDIOLINE TEL5-K 9 stron.

- Private Branch Exchanges -

Private Branch Exchanges

5.1

R button on private branch exchanges

If the telephone is connected to a private branch exchange

(PABX), functions such as transferring calls and automatic

call back etc. can be used.

The "R" signal button enables access to these functions.

Please contact your sales outlet where the PABX was

purchased to find out whether your phone can operate

properly in the private branch exchange and if other facilities

and services are available.

5.2

Dialling phone numbers when operating in

a PABX

In the case of private branch exchanges, it is necessary to

dial a specific number (e.g. "9" or "0") in order to obtain the

dialling tone for an outside line. When using some older

private branch exchanges, it takes a little time before the

dialling tone becomes audible. Particularly in the case of

such private branch exchanges, it is useful to insert an

automatic pause after the number for the outside line so that

the number can be dialled in a continuous process without

having to wait for the dialling tone.

To insert a dialling pause, press the Redial button once after

entering the number for the outside line and before entering

the actual telephone number. After dialling the number for

the outside line, the telephone then waits 3 seconds before

dialling the actual phone number.