Casio Privia PX-S3000 Instrukcja połączenia - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja połączenia dla Instrument muzyczny Casio Privia PX-S3000. Casio Privia PX-S3000 6 stron. Bluetooth, audio device, and computer connection
Drukuj stronę
Playing Sound from External
Audio Equipment Through the
Digital Piano's Speakers
Connection requires commercially available connecting cords,
supplied by you.
• The connecting cords should have a 3-pole stereo mini plug
on one end and a plug that matches the configuration of the
external device on the other end.
• Turn off the external device when making connections.
After connecting, turn down the Digital Piano and
external device volume levels whenever turning power
on or off.
• After connecting, turn on the external device and then
the Digital Piano.
• If external device notes that sound through the Digital
Piano speakers are distorted, lower the external
device's volume level setting.
AUDIO IN jack (Stereo mini jack (3.5mm))
3-pole stereo mini plug
EN-2
Portable audio player, etc.
External Input Volume
Adjustment and Center Cancel
When you are playing audio from an external source through
the Digital Piano's speakers, you can adjust the volume level
and even perform center cancel, which cuts the vocal part.
These operations are available for audio input using Bluetooth
AUDIO IN jack.
or the Digital Piano's
■ Center Cancel (Vocal Cut)
Enabling center cancel cuts the vocal part from the audio
being input using Bluetooth or the Digital Piano's
IN jack. Note that this function cancels the sound in the center
position of the audio, which may (depending on how the
original audio was mixed) end up canceling something else
other than the vocal part. How vocal cut is performed depends
on the sound being input.
■ To adjust the volume of external input
1.
Hold down the
appears on the display.
This enters the FUNCTION Mode.
2.
Use the
and
"AUDIO IN" and then touch
3.
Use the
and
"Audio In Volume" and then touch
4.
Use the
– and
(K1) to change the setting.
• You can set the volume within the range of 0 to 127.
• To return to the initial default setting, touch
+ at the same time.
5.
To exit the FUNCTION mode, hold down
EXIT until "[FUNCTION]" disappears from
the display.
■ To change the center cancel setting
1.
Perform steps 1 and 2 under
volume of external
2.
Use the
and
"Center Cancel" and then touch
3.
– or
+ to switch the setting between
Use
"On" (center cancel enabled) and "Off" (center
cancel disabled).
4.
To exit the FUNCTION mode, hold down
EXIT until "[FUNCTION]" disappears from
the display.
AUDIO
button until "[FUNCTION]"
buttons to display
ENTER.
buttons to display
ENTER.
+ buttons, or
Knob
"To adjust the
input".
buttons to display
ENTER.
– and