Danish Care Epi-Care free Instrukcja obsługi - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Produkty higieny osobistej Danish Care Epi-Care free. Danish Care Epi-Care free 16 stron.

2. OTHER SETTINGS

Volume:

The volume of the audible signal can be set on a scale

from 1-4, where 4 are the loudest.

Clock:

The clock setting can be changed.

Select the menu CLOCK and press OK.

Date and time are set by use of the arrow keys.

Press OK to move to next step.

When finished press OK to enter main menu.

3. GSM INFO

In order to access stored information regarding alarm calls, select the menu GSM

INFO. Choose ALARM TEL, ALARM TEXT, BACKUP TEL to view the specific

stored information.

4. DELETE REPORTS

To delete all reports, select the menu DELETE REPORTS and press OK. Confirm

by pressing the arrow key YES. Deleted reports cannot be restored.

5. POWER OFF

When selecting POWER OFF, the control unit can be turned off. Press OK

and confirm with YES. Turn the control unit on again by pressing any key

and confirm with YES.

6. EXIT

This is used to get out of the current menu and back to monitoring mode. Select EXIT

and press OK. In case the keys are not operated for approximately 1 minute, the device

will return to monitoring mode automatically.

Receiving an alarm call

When the Epi-Care® free enters alarm mode, it initiates an

alarm call and sends a text message to the configured alarm

number. The call is answered by picking up the phone,

listening to the audible beeps and hanging up the phone, when

the beeps has stopped. Subsequently the Epi-Care® free will

automatically reset to monitoring mode and further resetting is therefore not needed.

If the alarm call is not answered or the phone is not hung up, the Epi-Care® free will

attempt 2 more calls. If these calls are not answered, the control unit will try the backup

number, if it is configured. The procedure for the backup number is the same as for the

alarm number. If neither the alarm number nor the backup number acknowledge the

alarm, the call procedure will be repeated after approximately 5 minutes.

Sending of text messages requires an alarm text to be configured. Notice that text

messages can be delayed depending on the condition of the cellular network.

Advice: Set the Epi-Care® free phone number as a contact in the

caretaker's phone with the name of the user. Thus enabling the caretaker

to immediately see who is calling, during an alarm.

Note: If using the Epi- Care ® free with an external call system, it can be reset

manually by pressing the OK button.