Abus AZSG10000 Instrukcja instalacji i instrukcja obsługi - Strona 12
Przeglądaj online lub pobierz pdf Instrukcja instalacji i instrukcja obsługi dla System bezpieczeństwa Abus AZSG10000. Abus AZSG10000 19 stron. Wired outdoor siren
Installation
Installing the sounder
Step 1: Select installation location for the sounder
Select an installation location which:
is inaccessible to intruders and vandals.
is clearly visible, so that it acts as a strong deterrent.
can be reached with cabling.
Step 2: Open the sounder's cover
Open the cover for the lid-fixing screws on the right side (see Fig. 1).
Remove the fixing screws and open the cover.
Step 3: Mount the sounder on the wall
A pin serves as an anti-removal wall contact to activate the tamper switch on the inside
of the sounder. To fit uneven walls, the length of this pin can be adjusted. To do this,
Note
turn the screw, which is in the pin, either in or out.
Place the siren on the wall and align it vertically using the integrated spirit level. Mark the
three fixing points.
Drill the holes in the wall to fit the diameter of the anchor screws. Insert the anchor screws
supplied, in the holes.
Feed the cable provided in the inner housing through the cable inlet on the reverse side.
Insert the screws supplied through the sounder's fixing holes. Turn the screws in the screw
anchor. Do not tighten the screws yet.
Again, vertically align the sounder using the spirit level. Now tighten the screws.
Installation
12