AudioLink PLS-232 Podręcznik - Strona 2
Przeglądaj online lub pobierz pdf Podręcznik dla Aparat słuchowy AudioLink PLS-232. AudioLink PLS-232 7 stron. Personal listening system
Setup: (Fig. 1)
Select the transmitter location.
Place the IRT-232 transmitter on top of the TV or shelf near the television. Do not place
obstructions in front of the transmitter, as this will block the infrared light signal.
Step 1: Connect the transmitter power supply.
Insert the power supply cord into the 12 VDC jack on located on the back of the transmitter.
Then, plug the power supply into an AC wall outlet.
Fig.1
Step 2: Connect the transmitter to the audio source.
1-Insert the 3.5mm plug into the Audio In port of the transmitter.
2-Locate the two jacks on the television (typically one red and one white) labeled "Audio Out".
Note: Jacks labeled Input will not work.
3- Connect the provided audio cable to these two jacks and insert the other end into the Audio
In of the transmitter.