Casio MZ-X300 Podręcznik użytkownika - Strona 12

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Syntezator Casio MZ-X300. Casio MZ-X300 20 stron.

Drukuj stronę
Casio MZ-X300 Podręcznik użytkownika
■ Addition of a function to rewrite MIDI data header information used by the MIDI Recorder Mode
(Both MZ-X500 and MZ-X300)
When you start playing, various mixer settings are recorded to the MIDI data header, which is used by the MIDI
Recorder Mode, as header information.
The added function can be used to rewrite header information by performing the procedure below.
• Rewritten Information
Parts
System Track (Port: B Part1- 5), Solo Track 1-16 (Port: C, Part1-16)
Parameters
Tone, Volume, Pan, Coarse Tune, Fine Tune, Bend Range, Reverb Send, Chorus Send, Delay Send
1.
Select the user MIDI data to be changed by the MIDI Recorder Mode.
2.
Display the Mixer screen, and change the parameter whose MIDI data you want to rewrite. Target
MIDI recorder header settings are those shown above.
3.
After the changes are the way you want, hold down the Store button as you press the MIDI Play/Stop
button.
4.
This will overwrite the MIDI header information with the current mixer settings and then display
"Complete!"
■ Addition of a wav file loader function
(Both MZ-X500 and MZ-X300)
In addition to the ZWT native sample data file format, general-purpose WAV files* can also be imported when
using the Load command on the Media menu to load sample data from USB memory.
WAV files are listed in the MUSICDAT folder along with the ZWT files.
* Linear PCM, 16 bits, Monaural/Stereo, 44.1kHz/22.05 kHz
• Depending on the storage location, 3 seconds (Short) or 9 seconds (Long) are cut from the data header of the
imported wav file, which is then converted to 44.1kHz monaural. WAV format is not supported when saving unit
data to USB memory.
■ Addition of remaining memory capacity indication
(Both MZ-X500 and MZ-X300)
The SETTING Information screen shows the current remaining memory capacity.
Display Name
Free Space
■ Addition of sample data
• Tone data and accompaniment data has been updated.
The number of tones has been increased. (MZ-X300: From 900 to 950 tones; MZ-X500: From 1100 to 1150 tones)
For specific details, see the Ver1.31 Appendix.
Shows how much free space is currently available.
Description
12
Settings
–