DANIU QY-EWQ-01 Podręcznik - Strona 9
Przeglądaj online lub pobierz pdf Podręcznik dla Termometr DANIU QY-EWQ-01. DANIU QY-EWQ-01 16 stron. Infrared forehead thermometer
Drukuj stronę
- 1. Other Instructions‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧1
- 2. Feature‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧1
- 3. Description‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧1
- 4. Operating Instructions‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧4
- 5. Reference Temperature‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧6
33 ℃ in the human body temperature measurement mode.
The information "Lo" or "HI" appears for reference:
Reason for the message "Lo" or "HI"
Temperature value is affected by hair and
sweat
Temperature is affected by changes in
airflow
The measurement distance is too far
Enter indoors from outside low or high
temperature
14.Waste treatment instructions
■ Disposing electronic products and batteries directly in the trash can cause harm to the environment.
Please dispose of them in accordance with the laws of your area.
■ Do not discard the trash can at the end of the use of the infrared forehead thermometer. Please
dispose of it according to the laws in your area, or contact the manufacturer for recycling.
15.Electromagnetic compatibility warning
Note:
· Comply with the relevant requirements of electromagnetic compatibility of YY0505—2012
standard.
· Users should install and use according to the electromagnetic compatibility information provided in
the accompanying documents.
· Portable and mobile RF communication equipment may affect the performance of infrared
thermometers, avoid strong electromagnetic interference when using, such as near mobile phones,
induction cookers, etc .;
· Guidelines and manufacturer's declarations are detailed in the annex.
Warning:
· The equipment or system should not be used close to or stacked with other equipment. If it must be
used close to or stacked, it should be observed to verify normal operation in the configuration in which
it is used.
Temperature
measurement
measurement range
Ensure
no
obstructions
measurement
Ensure that the air remains stable during temperature
measurement
Please note that the measurement distance should
not be greater than 5 cm
Please wait 15 minutes until the subject's
temperature adapts to the measurement environment
before measuring
9 / 16
result
is
out
of
during
temperature