audiophony COMBO 130 Podręcznik użytkownika - Strona 6
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Wzmacniacz audiophony COMBO 130. audiophony COMBO 130 10 stron. Mixer/amplifier with tuner and usb player for 100v line
Drukuj stronę
ENGLISH
4.3 - Functions and additional information
MUTE
The Mic 1 and the chime feature a priority function.
Other sources will be dimmed while using the
priority channels. The MUTE mode can be
adjusted with the MUTE button located on the rear
panel. The default parameter is -30dB.
Connecting a USB key
Connect your USB key before turning on the
COMBO130. The default mp3 mode is "full loop",
the unit will read all the tracks contained in a loop.
Only use compatible formats: the key or HDD must
be FAT-formatted, with a maximum of 500 Gb.
Moreover, the player can read files up to 48 kHz.
The sampling rate is limited to 320 kbs.
We strongly advise against using devices
containing other types of files (images, videos,
etc).
4.4 - Output terminal
The output terminal is located at the rear and can be used to plug Banana connectors or bare wires. The
black socket is the com while the red sockets are the positive (the choice depends on the voltage).
Please only use loudspeakers whose transformers have a total power lower than the power of the amplifier.
If using a loudspeaker system between 4 and 16 Ohms, use the corresponding 4-16 Ohms output. In this
case, the total power of the speakers must be closed to the total power of the amplifier (+/-10%).
The impedance must not be lower than 4 Ohms or high than 16 Ohms in order to prevent any damage to
the amplifier.
6
COMBO130 - Mixer/Amplifier with tuner and USB player for 100V line
Chime
The chime features 4 different tonalities. The chime
benefits from the priority function.
USB folder tree
The USB key player can read up to 99 folders max.
Each folder can contain up to 999 files. Beyond
these limits, the player will not detect tracks.
Moreover the tree folder cannot include more than
8 layers, including the root directory.