audiophony 9895 Podręcznik użytkownika - Strona 7

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Głośniki audiophony 9895. audiophony 9895 12 stron. 180w battery-operated modular sound system

Drukuj stronę

CROSSER -180W BATTERY-OPERATED MODULAR SOUND SYSTEM

5-3 : Description of one of the UHF receiver module (A = RECEPT-MOD16)

A1 A3

5-4 : Description of the UHF handheld microphone (EMET-HAND)

H1 - Grille : Protects the capsule.

H2 - Capsule: converts the sound pressure into a signal.

H3 - Lockring.

H4 - Battery charge level indicator.

Flashes then stays lit when the batteries are empty.

H5 - ON/OFF power switch.

H6 - Channel selector, position it on the same channel as the RECEPT-MOD16

receiver.

H7 - Compartment for 2 LR06 batteries. Please make sure to keep the same

polarities during battery changes.

5-5 : Description of the headband mic/transmitter system (EMET-HEAD)

A1 - Radio Frequency indicator: indicates if the microphone is

activated. The indicator flashes when the mic is ON.

A2 - Displays the current frequency.

A3 - Audio Frequency indicator: indicates if the transmitter is

emitting a signal.

A4 - ON/OFF Indicator: indicates if the module is activated.

A5 - Channel selector: allows you to choose one of the 16

frequencies available.

A6 - HF module volume control fader: From OFF to maximum

(clockwise).

J1 - Battery charge level indicator. Flashes then

stays lit when the batteries are empty.

J2 - Mini XLR socket to connect the wired

microphone, hardwired as follows:

- Signal: pins 2 and 3

- Mass: pin 1

J3 - Volume control fader. From low to high

(clockwise).

J4 - ON/OFF power switch.

J5 - Channel selector, position it on the same

channel as the RECEPT-MOD16 receiver.

J6 - Belt clip.

J7 - Battery compartment. Please make sure to

keep the same polarities during battery changes

(type LR06 1.5V)

English

Page 7