audiophony SR12A Podręcznik użytkownika - Strona 5
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla System głośników audiophony SR12A. audiophony SR12A 8 stron. Goa 10/12/15 inches 2-way amplified speakers with bass reflex
Drukuj stronęSR10A / SR12A / SR15A - 10/12/15 inches 2-way amplified speakers with bass reflex
4 - Presentation
Amplification module
7
8
9
10
1
Power input socket
Allows you to connect the speaker to an electrical outlet.
Use the supplied IEC cord, and make sure the voltage
delivered by the outlet is in adequation with the value
indicated by the voltage selector before turning on the
built-in amplifier.
2
Power switch
Allows you to turn ON/OFF the built-in amplifier.
3
Voltage selector
Allows you to adapt the voltage of the amplifier to the
voltage of the electrical outlet.
4
Fuse
Protects the power supply module and the built-in
amplifier.
If need to replace the fuse, please make sure the new
fuse has exactly the same characteristics.
5
Front LED power button
Allows you to light up the Audiophony logo at the front.
6
5
11
12
13
6
7
HPF 75Hz button
Activates or deactivates the high-pass filter. When
activated, this 24dB/Octave
frequency below 75 Hz such as static noises, etc.
We strongly recommend to activate this filter when
combining this speaker to a subwoofer.
Indicator LEDs
-Power : Indicates the amplification module is ON.
-Signal : Indicates an incoming signal has been
detected.
-Clip : Indicates the incoming signal exceeds 0 dB.
In this case, please use the volume control
faders to make sure this LED only lits
occasionaly to prevent any damage to the
speaker and an optimal sound quality.
English
4
3
2
1
filter supresses any
Page 5