DanPumps S-IP Instrukcja instalacji - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Pompa wodna DanPumps S-IP. DanPumps S-IP 13 stron. In-line

Drukuj stronę

1. Manual content.

1. Pump labels.
2. Applications.
3. Technical specification.
4. Handling.
5. Pump installation.
6. Electrical installation.
7. Operation.
8. Service & maintenance.
9. CE Declaration.
10. Trouble shooting.
11. Spare parts.
2. Pump labels.
Danpumps wet-end label.
Applications
3.
.
This installation and service manual are valid to pump type S-IP and S-MP series.
S-IP and S-MP pumps are single stage, and non-self-priming pumps.
The pumps are constructed as in-line model, and driven with a standard norm electro motor.
The pumps are designed for clean water, saltwater and water with small contaminants.
Impeller is a closed model.
S-IP and S-MP pumps are as standard assembled with Svend-Hoyer electro motor.
Option: S-IP and S-MP pumps can be ordered with other motor brands like ABB or BEVI.
•
•
Option: Frequency Converter Drive direct mounted on the motor.
Option: ATEX motor. A22 (II 3D Ex tc IIIB T120) & ExnA (II 3G Ex nA IIC T3)
•
Option: Forced Fan Cooling.
•
•
Option: Bearing temperature sensor.
Option: IP56 / IP65.
•
Option: SIC/SIC Mech. Seal.
•
•
Option: Automatic Aspirator unit.
WARNING.
The pump must never be used in flammable or explosive media. If there are local restrictions concerning fire
risks, they must be obeyed at all time.
The pump meet EU's machine directive, see declaration of conformity in this manual.
The individual national country and local standards has at all time to be observed.
Technical information is subject to change without notice.
Motor label example.