Audiophony PA AMP660 Podręcznik użytkownika - Strona 10

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Wzmacniacz Audiophony PA AMP660. Audiophony PA AMP660 13 stron.

Français

4 - Using your amplifier

Please use high-quality cables to connect your speakers.

In order to prevent short-circuits, please tin the cables before connecting them to the output terminal.

Please make sure to respect the polarities when connecting your speakers to your amplifier.

Connect the speakers equipped with transformers to COM and 70/100V terminals.

Connect speakers that operate at 8 Ohms to the COM and 4~16Ω terminals.

It is not possible to use the 70V or 100V outputs with the 4~16Ω output at the same time.

The COM terminals are connected to each other and can be used for different outputs.

Transformer

100V speaker or ceiling speakers

8Ω

8 Ohms speaker or ceiling speakers

Dangerous voltage

Speakers must be connected last to

the amplifier.

Turn the amplifier on when the

installation is over and has been

checked thoroughly.

Page 10

AMP660/AMP1000 - High Power Public Address Amplifiers

COM COM COM 4~16Ω 70V 100V

Transformer

COM

COM COM 4~16Ω 70V 100V

Caution: the

minimum

impedance of

all the speakers

must not fall

below 4 Ohms

Caution: The sum of all

connected speakers must not

exceed the maximum power of

your amplifier