Audioplex SWM-2 Instrukcja instalacji

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Przełącznik Audioplex SWM-2. Audioplex SWM-2 4 stron. In-wall stereo switcher

Power:

Size:

Connections:

The SWM-2 switches up to two pairs of speakers, in any combination. from one

convenient location. The wiring diagram illustrates connections to the SWM-2. Note that

all the LEFT speaker and LEFT amplifier connections are on one side of the unit, and all

the right ones are on the other. Wires should be stripped about 1/4", inserted in the

appropriate connector opening, and the screw tightened. Check to be sure that no stray

strands stick out to cause short circuits!

Your AUDIOPLEX TECHNOLOGY SWM-2 speaker selector is covered by a

LIFETIME warranty against any defects in workmanship and materials. Any defects will

be remedied without charge for labor or parts.

Damage incurred by shipping or by accident is not considered to be a defect, and

not covered by this warranty. AUDIOPLEX TECHNOLOGY is not responsible for

defective operation caused by abuse or by modification or service by any unauthorized

person or agency.

The unit must be properly installed and operated according to instructions for the

warranty to apply. Any necessary servicing must be done by AUDIOPLEX TECHNOLOGY.

The product must be returned expenses prepaid, with written authorization from the

company. The product must be shipped with the proof of purchase and in the original

carton and packing material to avoid damage.

This warranty gives you specific legal rights. You may have other rights which vary

from state to state.

INSTALLATION MANUAL

TECHNOLOGY

SWM-2

IN-WALL STEREO SWITCHER

SPECIFICATIONS

The SWM-2 is rated at 100 Watts RMS continuous.

The SWM-2 will fit most standard single electrical junction

boxes.

Screw type connectors.

GENERAL INFORMATION

WARRANTY

2000 - 6/22/00