Audioplex QUADTROL Instrukcja instalacji

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Transformator Audioplex QUADTROL. Audioplex QUADTROL 4 stron.

Drukuj stronę

Attenuator type:

Switch:

Connector:

Power rating:

Frequency response: +0, -1 dB worst case (-6 dB tap), +0, -0.2 dB all other taps, 35 Hz-20 KHz.

Transformers:

-34 dB in 12 steps, 8 steps @ -3 dB each, 1 step @ 4 dB, 1 step @ -6 dB, last step

Attenuation:

Fits in a modified plastic double gang box. Will not fit in a metal box!

Mounting:

OPTIMATCH (TM): Will match impedance for almost any situation. Mechanical index (furnished)

permits presetting load impedance multiplication by X2, X4, X8, X16, X32, X64,

etc. Can be changed at any time.

The AUDIOPLEX TECHNOLOGY. QUADTROL(TM) is a 4-channel (or Quad) tapped

autotransformer type volume control for use with multi-channel systems such as surround, multispeaker

stereo, etc. It incorporates the well-known OPTIMATCH(TM) impedance matching system and wide

band tri-filar wound transformers.

The QUADTROL(TM) Will fit in a modified double gang plastic box (back of box needs to be

removed). Will not fit in a metal box! Screw type connectors are provided to ease installation.

A 4-pole, 12 position switch with shorting type contacts is used to provide a wide range of control.

Attenuation steps are 3 dB each except for the last 3, which are 4 dB, 6 dB and OFF respectively for a

total range of 34dB.

The tri-filar wound transformers combined with premium grade high silicon grain-oriented steel

laminations insure the best frequency response on all attenuation taps to be found anywhere! Worst case

response is +0, -1 dB at 20 KHz with an 8 Ohm load, usually encountered at the -6 dB tap which is at

mid-winding. In most cases, response is better than this.

The OPTIMATCH(TM) feature permits adjustment of the control to reflect whatever impedance is

desired from the controlled loudspeaker to the amplifier. This is accomplished by taking advantage of the

fact that the reflected speaker impedance is doubled for each 3 dB step of attenuation. A lock is provided

so that the reflected impedance can be limited to whatever is desired--it can be used to set the maximum

volume limit for the area controlled by the QUADTROL(TM).

The OPTIMATCH(TM) is a different concept in self-impedance matching controls. It can be used

either as a full range volume control, or as an impedance matching unit that can be adjusted to meet the

requirements of your installation. One simple adjustment can be made when the control is connected, and

can be changed to accommodate additions to the installation at any time. ONE SIZE FITS ALL! It is

easily retrofitted to almost any existing system.

INSTALLATION MANUAL

TECHNOLOGY

QUADTROL w/OPTIMATCH

SPECIFICATIONS:

Tapped auto transformer. (4)

4-Pole, 12 position rotary, make-before-break contacts, low torque specifications

for smooth feel.

Screw-tight type, non-removable.

72 Watts RMS continuous 35 Hz-20 KHz, 216 Watts audio.

Measured at full power, 8 Ohm load. Most controls better these specifications.

Tri-filar wound for flat response and minimum phase shift, grain-oriented, high

silicon steel laminations.

OFF.

HOW IT WORKS: