Consort CRXSL-05 Instrukcja instalacji i obsługi - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Kontroler Consort CRXSL-05. Consort CRXSL-05 6 stron. Single zone wireless controller
Drukuj stronę9. PROG - Automatic time mode
In this mode, the CRXSL will follow the week's time / temperature programme.
You can override the temperature in PROG mode by simply activating the CRXSL and using the
new temperature. The new set temperature will be then maintained until the next programme step.
Press
to ADVANCE to next programme number, press again to go back.
Programme time format defaults to weekday/weekend setting.
This lets you set a programme of up to 6 programming steps which will operate on Monday, Tuesday, Wednesday, Thursday
and Friday, and another programme of up to 6 programming steps which will operate on Saturday and Sunday.
Programme time format can also be set to 7 day format for full control of programmes on every day, or 24 hour format to use
the same programme every day.
This can be adjusted in the setup menu (see section 23). Setting 13 can be toggled between 5d2, 7d or 24h.
10. Set programme
1. To set up the heating programme the CRXSL has to
be in PROG mode.
2. Press and hold
for 5 seconds.
Programme mode is now displayed, with the
displayed day/days flashing.
3. Press
or
to select the day (in 7 day mode) or
group of days (in other modes) you want to set.
4. Press
to confirm day.
The programme number is now shown flashing.
5. Press
or
to select programme step number.
6. Press
to enable/disable selected program.
7. Press
to confirm programme number.
The minute display is now shown flashing.
8. Press
or
to set minutes in 15 minute increments.
9. Press
to confirm minutes.
The hour display is now shown flashing.
10. Press
or
to set hour.
11. Press
to confirm hours.
The programme temperature is now shown flashing.
12. Press
or
to set temperature.
13. Press
to confirm temperature.
This programme is now set
The day/days is shown flashing ready for the next
programme.
14. Wait 20 seconds to automatically exit programming
PROGRAM 1
ºC
20
19ºC
10
06:00
I3984133 Iss 05
PROGRAM 2
PROGRAM
4ºC
08:00
12:00
Logic diagram for setting programme on CRXSL
11. Set programme active / inactive
In programming mode, select the programme you want to
make active or inactive. Press
E.g. Programme 3 inactive
An example of one day programme on CRXSL
3
4
PROGRAM
22ºC
16ºC
14:00
or
buttons to set the
- SELECT DAY TO SET
- SELECT PROGRAMME TO SET
- SET MINUTES FOR PROGRAMME
- SET HOURS FOR PROGRAMME
- SET TEMPERATURE FOR PROGRAMME
to toggle between settings.
Programme 3 active
PROGRAM 5
PROGRAM 6
22ºC
16:00
22:00
10ºC
3