Cast S226S Podręcznik użytkownika - Strona 6

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Piec na drewno Cast S226S. Cast S226S 16 stron.

Before assembling,place check contents against the following list and advise your

dealer immediately if any parts are missing.

1 x Stove body

1 x Flue Connector c/w Fireproof Gasket

1 x Firebox Top Baffle Plate

1 x Ash pan & Handle

1 x Grate

1 x Fixings Kit

1 x Heat Resistant Glove

1 x vermiculite plate(2 sides and 1 back

vermiculite plate)

Assembly

Unpack the stove and remove packing materials.Open the door and remove ashpan,

fixing fit from inside the stove.

1. Install the Flue connector upward as picture show below:

If the rear mounting flue configuration is to be used, change the flue connector

backward,then it will be ok.

2. Set ashpan in position as shown picture below. An ashpan handle is supplied for

when the stove is in use.