AudioSource SW Ten Instrukcja obsługi - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Subwoofer AudioSource SW Ten. AudioSource SW Ten 4 stron. Powered subwoofer with built-in active stereo crossover
Drukuj stronę
Line Level Connections
In this example, the pre-amp outputs of a stereo receiver are
connected to the SW Ten line inputs . The line outputson the
SW Ten re t u rn the line level signal to the power amp inputs
on the stereo re c e i v e r, which in turn powers the left and right
s p e a k e r s .
Dedicated Subwoofer Connections
Many surround sound decoders, home theater processors and
audio/video receivers are equipped with a dedicated subwoofer
line output. In this case, the signal is already processed and
does not need to return to the system or other speakers.
Connect this line output to the line inputsof the SW Ten.
A Y connector should be used to feed this single output to
both the left and the right line inputs.
Enjoy your purchase. This manual provides detailed instructions for setting up your equipment.
Our commitment to your satisfaction doesn't end there. We also offer friendly, toll-free assistance.
1.800.HELP .115
Hi Level Connections
H e re the signal is already amplified as it leaves the re c e i v e r /
a m p l i f i e r. The speaker terminals of this unit are connected to
the hi level inputsof the SW Ten. The left and right speakers
receive the original amplified signal from the SW Ten hi level
o u t p u t s .
Television Enhancement
Many newer television sets are equipped with variable stereo
outputs. The signal available at these outputs varies with the
television volume. In this situation, these variable audio o u t-
puts can be connected directly to the SW Ten line inputst o
enhance the bass response of the television's built-in speakers.