Consult IX CellWizard WTX-35-C Podręcznik użytkownika - Strona 10
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Nadajnik Consult IX CellWizard WTX-35-C. Consult IX CellWizard WTX-35-C 15 stron. Cw & wcdma test transmitter
Drukuj stronęGeneral Operations
Preparations
Connect the charger into its socket.
Note, for the first time usage of the device, battery should be charged continuously 10 hours.
Switch On the device by 1 second press on the On/OFF switch.
Connect the antenna to the device.
The device now is ready to start tests.
In the following section, the menus of the WTX will be described in details before going through illustrating
different operations of the unit
Menus
Main Menu
Start Test: To start a test
This will recall all configurations for the last test setup incl.: Mode, Freq, Amp, and
scrambling code. And you can modify afterwards
Saved Channels: This menu contains saved test channels with all of its configurations.
Use num pad (1) to delete saved test channel, and use num pad (2) to start RF test for a
chosen channel, or simply click RF ON/OFF
New Channel: To add a new channel to the device memory
Setting
Memory Status: Shows the number of utilized and free memory locations.
WTX can store up to 24 test channels
P a g e
| 10
Mode:
To choose the transmitting mode; either CW or W-CDMA "for
WTX-05-W and WTX-05-A only "
Freq:
Enters the required channel frequency in the relevant band
(standard frequency step 200 KHz)
Amp:
Enters the required channel amplitude
Scr.:
Enters the scrambling code of the W-CDMA signal. Scrambling
code ranges from 0 to 511
Factory setting - This function is used to restore WTX factory settings. It
will delete all saved test channels from your device
Note: this will erase activated Key-codes license
Version/Upgrade:
- Providing info about activated features, and available upgrades
- Entering key-codes required for any newly purchased upgrade