AudioSource SW Two Instrukcja obsługi - Strona 2
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Głośniki do kina domowego AudioSource SW Two. AudioSource SW Two 10 stron. Powered subwoofer with built-in active stereo crossover and high intensity video shielding
Również dla AudioSource SW Two: Instrukcja obsługi (4 strony), Instrukcja obsługi (4 strony), Instrukcja obsługi (8 strony)
Drukuj stronę
Model PreAmp/Tuner Two
Stereo PreAmplifier and AM/FM Digital Tuner
Auto
104.5
FM
AM
Remote Sensor
Power
Tuning
Tuner
AM/FM
Using The Controls
Power : Press this button to Turn "ON" the A.C. power to the PreAmp/Tuner Two. The
Red LED indicator will remain lit when the unit is ON.
Power
Tuning : Press the TOP END of this button to RAISE the frequency of the AM/FM tuner.
Press the BOTTOM END of this button to LOWER the frequency of the AM/FM tuner.
Tuning
Tuner : Press this button to select the Tuner as your input source. The Red LED will
indicate your selection.
Tuner
AM/FM : Press this button to select between AM and FM bands. The Red LED and
Display window will indicate your selection.
AM/FM
Mono : Press this button to receive a station in "Mono". This Button is useful for "weak"
or "hard to capture" FM stations.
Mono
Memory : Press this button when entering stations into the tuner's "Memory". When
you've found a station to store into the tuner's memory, Press this button once, and then
Memory
press the numbered buttons (#1 to #9)
Auto : Press this button to choose between "Automatic" or "Manual" tuning of radio
stations. In the "Auto" mode, the tuner will scan directly from station to station, every time
the "Tuning" button is pushed. In the "Manual" mode, the tuner will advance "up" or
Auto
"down" incrementally, every time the "Tuning" button is pushed.
+10 : Push this button "In" to access the Tuner Presets #11 to #19. Keep this button in the
"Out" position to access the Tuner Presets #1 to #9.
+10
#1 to #9 : Push these numbered buttons to listen to "Memorized" stations, or to enter
stations into "Memory".
5
Video 1 : Press this button to select "Video 1" as your input source. The Red LED will
indicate your selection.
Video 1
Video 2 : Press this button to select "Video 2" as your input source. The Red LED will
indicate your selection.
Video 2
Video 3 : Press this button to select "Video 3" as your input source. The Red LED will
indicate your selection.
Video 3
Stereo
Memory
1
2
MHz
15
KHz Tuned
4
5
Mono
Auto
7
Memory
+10
8
Bass
3
Video 1
Tape
6
Video 2
CD
Min
Max
9
Video 3
Phono
4.
Volume
Treble
Balance
Min
Max
Left
Right
Min
Max