Audiotec Fischer PP 62DSP Podręcznik użytkownika - Strona 2
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Wzmacniacz Audiotec Fischer PP 62DSP. Audiotec Fischer PP 62DSP 16 stron. Extension card
Również dla Audiotec Fischer PP 62DSP: Instrukcje instalacji (2 strony)
Drukuj stronę
Congratulations!
Dear Customer,
Congratulations on your purchase of this innovative
and high-qual ity MATCH product.
With the PP 62DSP, MATCH is setting new stan-
dards in the evolving plug & play market.
General instructions
General installation instructions for MATCH
components
To prevent damage to the unit and possible injury,
read this manual carefully and follow all installation
instructions. This product has been checked for
proper function prior to shipping and is guaranteed
against manufacturing defects.
Before starting your installation, disconnect the
battery's negative terminal to prevent damage
performance and to ensure full warranty coverage,
we strongly recommend to get this product installed
by an authorized MATCH dealer.
Install your PP 62DSP in a dry location with suf-
a solid mounting surface using proper mounting
area around and behind the proposed installa-
tion location to ensure that there are no electrical
cables or components, hydraulic brake lines or any
part of the fuel tank located behind the mounting
surface. Failure to do so may result in unpredictable
damage to these components and possible costly
repairs to the vehicle.
We wish you many hours of enjoyment with your
new MATCH PP 62DSP.
Yours,
AUDIOTEC FISCHER
General
motor vehicles which have a 12 Volts negative ter-
minal connected to the chassis ground. Any other
the electrical system of the vehicle.
Use only the enclosed MATCH cable for con-
nection of the PP 62DSP. The use of other
For a proper
cables can result in damage of the ampli-
loudspeakers!
Prior to installation, plan the wire routing to avoid
any possible damage to the wire harness. All
cabling should be protected against possible
crushing or pinching hazards. Also avoid routing
cables close to potential noise sources such as
electric motors, high power accessories and other
vehicle harnesses.
The fuse may only be replaced by an
identically rated fuse (20 A) to avoid damage of
instruction
for
connecting
the
15