Contacta HLD9 Podręcznik użytkownika - Strona 7

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Aparat słuchowy Contacta HLD9. Contacta HLD9 20 stron. Hearing loop driver

Drukuj stronę
Front Panel Overview:
Shows MIC level
MIC
CLIP
ACTIVE
PHTM
Driver Modes:
Normal Operation Mode – The driver is fully functional. However, the
controls on the front do not change the driver operation.
Adjustment Mode – In this mode one can adjust all of the levels using
MIC
CLIP
the + or – buttons.
ACTIVE
MIC
PHTM
CLIP
ACTIVE
PHTM
MIC
CLIP
ACTIVE
PHTM
To enter adjustment mode press
both MIC + and - simultaneously
MIC
CLIP
ACTIVE
PHTM
Pressing the MIC + or - will
adjust the MIC input gain;
adjustments are in 1dB steps.
LEDs show the MIC's level
after fader

Setting up the Driver

Shows LINE level
LINE
contacta HLD9
LINE
2.5
contacta HLD9
CLIP
PERIMETER
ACTIVE
PRIMARY
LINE
LOW SIG
SECONDARY
CLIP
PERIMETER
ACTIVE
PRIMARY
LOW SIG
SECONDARY
LINE
LINE
Pressing the LINE + or - will adjust the
LINE input gain; adjustments are in 1dB
steps. LEDs show the LINE level after
fader. If input is low the LOW SIG LED
will illuminate
contacta HLD9
CLIP
PERIMETER
ACTIVE
PRIMARY
LOW SIG
SECONDARY
2.5
5
7.5
10
5
7.5
10
DRIVE
STATUS
DRIVE
POWER
STATUS
POWER
contacta HLD9
CLIP
PERIMETER
ACTIVE
PRIMARY
LOW SIG
SECONDARY
contacta HLD9
CLIP
PERIMETER
ACTIVE
PRIMARY
LOW SIG
SECONDARY
Shows DRIVE level
2.5
5
7.5
10
DRIVE
STATUS
POWER
2.5
5
7.5
10
DRIVE
STATUS
POWER
In adjustment mode the
STATUS LED will flash
2.5
5
7.5
10
DRIVE
STATUS
POWER
Pressing the Drive + or - will
adjust the Drive output by
1dB steps. LEDs show the
DRIVE level in approx 0.5A
increments
7