3xLogic infinias eIDC32 Skrócona instrukcja obsługi - Strona 14

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Gateway 3xLogic infinias eIDC32. 3xLogic infinias eIDC32 17 stron.

eIDC Web Server: Single Door

Application

If the eIDC is to be used as a stand-alone unit for a single door (neither

infinias Access or Supervisor Plus will be used), you can easily use

the eIDC's built-in web server and quickly program the system.

1. Open a standard Web browser.

2. Type the IP address given by the eIDC into the address bar of the

browser, and then press Enter. The Intelli-M Supervisor (Web

Edition) screen appears.

3. Click the "Click Here to Start" button. The login screen appears.

4. Type admin (all lowercase) in the user name and password text

boxes (admin is the default value for both of these fields), and then

click the "Login" button.

5. From the Event screen, click the "System" button to display the

"System Management" screen.

6. Click the "Database Management" button.

7. Click the "Load Default Configuration" button. (Click "OK" to close

any dialog boxes that appear.)

8. After the device configuration is loaded, click the "Done" button.

9. Click the "Card Holders" button and do the following:

a. Add or Modify a card holder.

b. Fill in the "Site code" field and the "Card code" field.

c. Fill in the first name, last name, and company fields.

NOTE: The "Master Privilege Group" provides unrestricted access

to the door and all services in the system. You can create additional

groups with different privilege credentials. Refer to the "Web

Interface User's Guide" for additional information.

d. Click "OK" and then click the "Events" button.

10. Swipe the card at the active card reader to ensure the functionality

of the system. Access should be granted.

11. Repeat Step 9 for the access cards of additional personnel.

QSG-002 / 01-03-2017