DAPAudio GS-630 Podręcznik - Strona 6

Przeglądaj online lub pobierz pdf Podręcznik dla Głośniki DAPAudio GS-630. DAPAudio GS-630 8 stron.

GS-630

Description of the device

Features

●

Power taps: 7,5/15/30 W

●

Line voltage: 100 V

●

Impedance: 6,8 Ω

●

Speaker size: 6"

●

Frequency response: 80 Hz–20 kHz

●

Sensitivity: 90 dB

●

Housing: ABS

●

Color: Green

●

IP rating: IP65

●

Dimensions: 325 x 325 x 330 mm (LxWxH)

●

Weight: 3,6 kg

Remove all packing materials from the GS-630. Check if all foam and plastic padding is removed.

Connect all cables.

Do not supply power before the whole system is set up and connected properly.

Always disconnect from electric mains power supply before cleaning or servicing.

Damages caused by non-observance are not subject to warranty.

Follow the directions below, as they pertain to your preferred operation mode.

Before plugging the unit in, always make sure that the power supply matches the product specification

voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.

Connect the device to the main power supply.

Connect the speaker to an amplifier. Make sure that you connect the appropriate cable to the

appropriate connector.

01) Connect the blue cable to the common cable.

02) Connect one of the colored cables to the main feed cable: red cable = 30 W, yellow cable = 15 W

or green cable = 7,5 W.

03) Put the speaker on a flat surface.

Ordercode: D6610

Fig. 01