DAPAudio DSA-600 Podręcznik użytkownika - Strona 8

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Wzmacniacz DAPAudio DSA-600. DAPAudio DSA-600 18 stron. Dsa-series

Frontpanel

1. Rack Mounting Holes.

Two front panel mounting holes are provided on each mounting flange,

2. Fan Inlet Grills.

DSA Series amplifiers are cooled by two, rear-mounted fans, Cool air flows over the heat sinks and

exhausts through the rear grills, Make sure these outlets remain clear to allow unrestricted air flow,

3. LCD display

Shows the working mode, protection status and temperature of the modules.etc,

4. Input Attenuators.

Whenever possible, set attenuators fully clockwise to maintain optimum system headroom. The input

attenuator controls (one for channel A, one for channel B) located at the front panel adjust gain for

their respective amplifier channels in all modes. See the specifications at the end of this manual for

standard voltage gain and input sensitivity information.

5. Protect LEDs.

Indicates that the channel is in Protect mode (speakers disconnected by output relay),

6. Clip LEDs.

Illuminates at the clipping threshold, Continuous illumination also indicates that ACL (Active Clip

Limiting) protection circuitry is engaged,

7. Active LEDs.

Indicates that the channel is active.

8. Level Indicator.

9. AC Power Switch

This is the main Power switch. Press to turn the amplifier on.

Fig. 2