DAPAudio Oxygen Instrukcja obsługi - Strona 15
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Mikser muzyczny DAPAudio Oxygen. DAPAudio Oxygen 16 stron.
Drukuj stronę
Product Specification
Model: DAP Audio Oxygen
Power
Dimensions
Weight
Inputs
7x Microphone (XLR balanced)
11x Stereo Line (2x gold-platet RCA unbalanced)
3x Stereo Phono with faderstart (2x gold-plated RCA unbalanced)
1x Effect return (2x RCA unbalanced)
+48V Phantom Power (optional; default = OFF; just change jumper position for ON)
Mic Input
Frequency response
Distortion (THD & N)
Line Input
Frequency response
Distortion (THD & N)
Sensitivity Range
Stereo Inputs
Line Input
Bandwidth
Distortion (THD & N)
Equalization
Hi Shelving
Mid EQ
Low Shelving
Outputs
2x Mono Master Fader (2x XLR balanced and 2x gold-plated RCA unbalanced)
1x Stereo Monitor control (2x gold-plated RCA unbalanced)
1x Stereo Effekt send (2x gold-plated RCA unbalanced)
1x Stereo Record (2x gold-plated RCA unbalanced)
1x Stereo PFL by Que control (2x gold-plated RCA unbalanced)
1x Stereo Headphone control (6,3mm jack)
Noise Gate (default = ON, just change jumper position for OFF)
Master Mix Section
Signal Noise Ratio
Dynamic Range
Max Output
Returns Gain range
Send Max Out
DJ Lamp
Headphone
Headphone 2 x 115mW at 32 Ohm
Design and product specifications are subject to change without prior notice.
AC 230V-50Hz (CE)
480 x 355 x 110 mm (LxWxH)
7,46 Kg
electronically balanced
10 Hz to 60 KHz ±3 dB
0.007% at +4dBu, 1Khz
electronically balanced
10 Hz to 60 KHz ±3 dB
0.007% at +4dBu, 1Khz
0,5V -
unbalanced
10 Hz to 55 KHz ±3 dB
0.007% at +4dBu, 1Khz
12 KHz +/-15 dB
2.5 KHz +/-15 dB
80 Hz +/-18 dB
90 dB
112 dB
+22 dBu balanced XLR, +22 dBu unbalanced 1/4" jacks
OFF to Unity to +6 dB
+22 dBu unbalanced
12 V DC 400mA
13