DAPAudio CM-95 Podręcznik - Strona 7

Przeglądaj online lub pobierz pdf Podręcznik dla Mikrofon DAPAudio CM-95. DAPAudio CM-95 12 stron.

The microphone

Low profile boundary mic with built-in electronics can be easily placed on a pillow or other surface in a

kick drum for excellent attack and bass punch. Very high SPL ability and lower open circuit sensitivity

matches Kick drum performance characteristics without overloading the mic preamp in a mixer. The CM-

95 also comes with a fixed 1,5-meter cable.

Set Up and Operation

Connect the microphone to a mixer or recording device before turning on the phantom power. Make

sure all volume and gain controls on your mixer, mic preamp or recording device are at their minimum

settings when switching in the phantom power.

Once the CM-95 is plugged in and the phantom power is switched in, Move the channel fader gradually

to the 0dB position adjust the input gain using your channel peak led or VU-meter.

Place the CM-95 at the bottom of the kick drum on a cushion or other soft material to avoid unwanted

noise. See setup example 1.

For the best results, we suggest using the CM-95 in combination with our DM-55 (D1357). Carefully cut the

lows on the CM-95 channel of your mixer and cut highs on the DM-55 channel of your mixer to get the

best results. See setup example 2.

Frequency and Polar Diagrams

Setup example 1: Simple setup.



Make sure to place the CM-95 on a cushion, piece of isolation material or other soft material to avoid

contact noise.