Duratool D03168 Skrócona instrukcja obsługi - Strona 2
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Pistolet lutowniczy Duratool D03168. Duratool D03168 2 stron.
Drukuj stronę
OPERATION
•
Firstly, place the soldering iron in the holder.
•
Then connect the plug to the receptacle on the station and turn clockwise to
tighten the plug nut.
•
Connect the control unit to the power supply and switch the power on.
•
A self-test is carried out in which all the display elements are switched
on briefly.
•
The electronic system then switches on automatically to the set
temperature.
DISPLAY & TEMPERATURE SETTINGS
•
Press either " + " or " - " to adjust the temperature.
•
Press " * " to transfer between °C and °F.
Note: The default unit is °C.
TECHNICAL SPECIFICATION
•
Rated voltage range: 220-240V AC, 50Hz / 110-130V AC, 60Hz.
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF
ELECTRICAL & ELECTRONIC EQUIPMENT.
When this product has reached the end of its life it must be treated as Waste
Electrical & Electronic Equipment (WEEE). Any WEEE marked products
must not be mixed with general household waste, but kept separate for the
treatment, recovery and recycling of the materials used. Contact your local
authority for details of recycling schemes in your area.
Made in China. PR2 9PP
V.1.0