Duratool D03127 Podręcznik - Strona 8
Przeglądaj online lub pobierz pdf Podręcznik dla Multimetr Duratool D03127. Duratool D03127 8 stron.
Drukuj stronę
Range
200Ω
2kΩ
20kΩ
200kΩ
2MΩ
20MΩ
Function
Diode test
•
Input protection: Maximum DC or AC 600V RMS.
Function
When the built-in buzzer sounds,
the measured resistance is no
more than about 50Ω.
•
Input protection: Maximum DC or AC 600V RMS.
CLEANING & MAINTENANCE
•
Clean the outer cabinet of the instrument with a clean, damp cloth and a small
amount of mild detergent.
•
Do not use any chemicals, abrasives or solvents that could damage the meter.
REPLACING THE BATTERIES
•
Turn off the power supply and disconnect the probe from the measured circuit.
•
Loosen the screws used for fixing the battery cover and remove the battery cover.
•
Remove the old batteries and replace with new ones.
•
Mount the battery cover and and tighten the screws.
RECYCLING INFORMATION
This symbol indicates that separate collection of Waste Electrical and
Electronic Equipment (WEEE) or waste batteries is required. Do not dispose
of these items with general household waste. Separate for the treatment,
recovery and recycling of the materials used. Waste batteries can be returned
to any waste battery recycling point which are provided by most battery
retailers. Contact your local authority for details of the battery and WEEE
recycling schemes available in your area.
Resistance
Resolution
0.1Ω
0.001kΩ
0.01kΩ
0.1kΩ
0.001MΩ
0.01MΩ
Range
Resolution
1V
0.001V
Description
Accuracy
± (1.0% reading + 3)
± (1.2% reading + 15)
Diode
Testing current: about 1mA; open circuit
voltage: about 2.8V.
The display will show the approximate
value of the diode forward voltage drop.
Buzzer On/Off
Testing current: about 1mA; open
circuit voltage: about 2.8V.
8
•
Input protection:
Maximum DC or AC
600V RMS
Test Environment
Test Environment
Made in China. PR2 9PP
V 1.0