DAPAudio DCP-24 Podręcznik - Strona 13
Przeglądaj online lub pobierz pdf Podręcznik dla Sprzęt nagrywający DAPAudio DCP-24. DAPAudio DCP-24 20 stron.
Drukuj stronę
Switch the currently selected parametric EQ on or off by dialing the jogwheel. Click the jogwheel to
confirm and proceed to the next parameter. Or push the item up button (2) to proceed with the next
item. In our case PEQ 2
Adjust the PEQ 2 parameters in the same way as described for PEQ 1. When finished, pushing the item up
(2) button let's you adjust the PEQ 3, PEQ 4, PEQ 5, PEQ 6, PEQ 7, PEQ 8, PEQ 9 and PEQ 10 parameters.
Pushing the item up (2) button after PEQ-10 is selected, allows you to adjust the limiter parameters for
input A.
Adjust the limiter threshold by dialing the jogwheel (8). Click the jogwheel (8) to proceed with the next
parameter.
Adjust the limiter release time by dialing the jogwheel (8). Push the item up (2) button to proceed with the
next item.
IMPORTANT!
Enabling the limiter on a specific output also changes the way in which the level is
displayed on the corresponding LED VU meter: The level shown on this meter is no longer the
"absolute" output level, but the level of the signal at -24dB, -12dB, -6dB, -3dB compared to the limiter's
threshold (orange limit LED), no matter what the threshold value is.
Select normal or inverted phase by dialing the jogwheel (8). Push the item up (2) button to proceed with
the next item.
Select link on or off by dialing the jogwheel (8).
Out 1
peq 1
type: BES 24db
11,75dB_________
_________
Out 1 Peq 2
freq: 20hz
11,75dB_________
_________
Out 1
Limiter
Thr.: 0dbu
11,75dB_________
_________
Out 1
Limiter
rel.: 50
11,75dB_________
_________
Out 1
phase:
normal
11,75dB_________
_________
Out 1
link:
off
11,75dB_________
_________
11