DAPAudio VPC-12 Podręcznik - Strona 6

Przeglądaj online lub pobierz pdf Podręcznik dla Sprzęt nagrywający DAPAudio VPC-12. DAPAudio VPC-12 8 stron.

VPC-12

Description of the device

Features

 Line voltage: 100V

 Power consumption: 12W

 Material: ABS

 Mounting: Flush, surface

 Mounting hole: Ø 50 mm

 Dimensions: 80 x 40 x 155 mm (LxWxH)

 Weight: 0,28 kg

Optional accessories

D6537 – CB-2 (2-unit cover box for volume controllers)

Remove all packing materials from the VPC-12. Check if all foam and plastic padding is removed.

Connect all cables.

Always disconnect from electric mains power supply before cleaning or servicing.

Damages caused by non-observance are not subject to warranty.

See the diagram above (fig. 01). Make sure that you connect the appropriate cables to the appropriate

connectors:

01) Connect the main feed cable (+) from the 100V amplifier to the respective IN+ connector (1A-6A).

02) Connect the common cable (-) from the 100V amplifier to the respective IN- connector (1B-6B).

03) Connect the common cable (-) from the emergency signal source to the E connector. Connect the

main feed cable (+) from the emergency signal source to the P connector.

04) The VPC-12 is equipped with the mute/emergency function. Connect the common cable (-) from

the 24V emergency switch to the – connector (above 1B-6B connectors). Connect the main feed

cable (+) from the 24V emergency switch to the + connector (above 1B-6B connectors).

05) Connect the common cable (-) to the OUT- connector, and connect the other end to the common

connector on your speaker.

Ordercode: D6534

Do not connect speakers which exceed 12W

Fig. 01