Duratool D01965 Instrukcja obsługi - Strona 12

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wiertarka Duratool D01965. Duratool D01965 12 stron. 18v li-ion cordless drill driver

Servicing and information

Have your power tool serviced by a q

replacement parts. This will ensure that the safety of the power tool is maintained.

Contact your retailer for any other issues.

For further details visit

Environment

ENVIRONMENT

Should your appliance need replacement after extended use do not

discard it with the

Plug replacement

The fuse in the main plug of your power tool should always be replaced with one of

identical rating

Check the voltage given on your powe r tool matches the supply voltage

The power tool is supplied with a

follow the instructions below.

Important

The wires in the mains lead are coloured in accordance with the following code:

Blue = Neutral

As the colours of the wires in the mains lead of this appliance may not correspond with the

colour markings identifying the terminals in your plug, proceed as follows:

The wire which is coloured blue must be connected to the terminal which is marked with N.

The wire which is coloured brown must be connected to the terminal which is marked

with the letter L.

If a 13 Amp (BS 1363/A) plug is used, a BS 1362 5 Amp fuse must be tted or if any other

type of plug is

used a 5 Amp Fuse must be tted, either in the plug or adaptor, or on the

distribution board.

If a moulded plug is

and severed cable, it must be replaced by a service agent or a similarly qu

order to avoid hazard

WWW.Duratool.co.uk

plug, however if you should need to

Brown – Live

and has to be removed take great care in disposing of the plug

repair person using only identical

a new plug

ed person in