Abus SHMK10000 Podręcznik - Strona 10

Przeglądaj online lub pobierz pdf Podręcznik dla Czujniki bezpieczeństwa Abus SHMK10000. Abus SHMK10000 12 stron. Z-wave magnetic contact
Również dla Abus SHMK10000: Skrócona instrukcja obsługi (2 strony)

Drukuj stronę

4.4. Reset (Factory-Reset)

5. Advanced Z-Wave Parameter

5.1. Association Group Information

Z-Wave devices can control other devices directly. This direct control is called in Z-

Wave association. For this purpose, the device ID of the device to be controlled must

be stored in the controlling devices. This is done in so-called association groups. An

association group is always linked to an event in the controlling device (pressing a key

or triggering a sensor). When this event occurs, a control command - usually a BASIC

SET - is sent to all devices stored in an association group.

The magnetic contact supports the following association group:

Group

Maximum

Number

Devices

Group 1

0x05

Group 2

0x05

Group 3

0x05

Group 4

0x05

1. Press the Tamper-button 3 times within 1.5

Seconds

2. The device is now restored to factory

settings

Note:

1, This procedure should only be used if the

primary gateway is not capable of acting.

2, If the multi-sensor is set to the factory

setting, the status is set to "not included", the

association

configurations are reset to default.

Transmitted Content

Lifeline association group Include command classe:

Battery report, Notification report, and Device Reset Locally

notification, Binary report.

Root

Device

group(Binary

Command Class:Compatible with 300 series 1-Binary

Sensor reports status of open or close door via Lifeline. 2-

When the sensor detects status change between close

door and open door, the device will be triggered.

Root

Device

group(Binary

Command Class:Compatible with 300 series

1-Binary Sensor reports the removed status of door sensor.

2-When the sensor detects status change of tamper, the

device will be triggered.

Root Device group(Notification)

1-Notification report open door or close status via Lifeline.

settings

and

Sensor)

Binary

Sensor)

Binary

English

possible

Sensor