DAQ system EMB-OPT02 Podręcznik użytkownika - Strona 11

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Jednostka sterująca DAQ system EMB-OPT02. DAQ system EMB-OPT02 15 stron.

2-6 Fiber Cable

An optical cable is a transmission cable made to transmit the converted laser signal to a long

distance and uses two transmission modes.

Single Mode : It is used for broadband and long-distance transmission with a core diameter of

9 ㎛, and it is possible to transmit without relay up to about 50Km. In the case of

single-mode with a small core diameter, it is difficult to transmit a large amount of

information because the cable passage is narrow, but instead it can be transmitted

over a long distance. The cable color is mainly yellow.

Multi Mode : The core diameter is 50~100 ㎛, so it is often used in short distances. In the case

of multimode with a large core diameter, a large amount of information can be

transmitted because the passage of the cable is wide, and the color of the cable is

mainly orange.

Optical connectors include LC, ST, MTRJ, SC, FC, and MU types, but EMB-OPT02 mainly uses

multimode LC type as shown in [Figure 2-7].

[Figure 2-6. Signal transmission method according to transmission mode]

EMB-OPT02 User's Manual