Duratuf KIWI SHEDS MK3 Instrukcja montażu - Strona 14
Przeglądaj online lub pobierz pdf Instrukcja montażu dla Schronienia Duratuf KIWI SHEDS MK3. Duratuf KIWI SHEDS MK3 16 stron. Base size 3380mm x 1715mm
Drukuj stronę
Step 3: Re-position Floor Board. Lay out remaining Floor
Boards checking around Studs as you go. The
last Floor Board may have to be cut to size.
Step 1: Attach " T" locking handle with two 8x10mm screws.
Slide hook onto square shaft and secure with a
lock washer.
MK3 FLOOR (Optional)
MK3 HASP & STAPLE
SECURITY DOOR (Optional)
Lock Washer
Step 4: Nail in each Floor Board, two 50mm nails in each
end and two into Joists. Measure and cut Floor
Flashing (110) to fit in between Door Jamb Flash-
ings and nail in place using 50mm Clouts.
Using six rivets and one 50mm clout
attach hasp to Door Jamb Flashing and
the staple to the Door as shown.
(Note: see below for security option)
14
Hook