Duratuf KIWI MK4C Instrukcja montażu - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Przechowywanie Duratuf KIWI MK4C. Duratuf KIWI MK4C 18 stron. Shed

Note:

For sheds with the Raised Floor Modification option the studs will be 1.780m long to allow the Wall Sheets to pro-

trude 20mm below the Bottom Plate. Refer to Raised Floor Modification section (Page 15).

Step 1: Back Wall: Select one 4.210m Base Plate (Green), one

4.210m Top Plate (Red) and six Studs (Yellow). Lay out Plates

and two Studs on a flat surface and nail together using two

75mm nails per join. Nail in remaining centre Studs using

Nogs to get correct position. Position Nogs centrally between

Top and Bottom Plates and nail in place. (All Plates, Studs

and Nogs are joined together with two 75mm nails each end).

Step 2: Front Wall: Select one 4.210m Base Plate (Green), one

4.210m Top Plate (Red), four Studs (Yellow) and two

1.185m Nogs. Nail studs to each end of Plates. Nail in re-

maining two Studs using 1.185m Nogs to get correct posi-

tion. Position Nogs centrally between Plates and nail in

place.

Step 3: End Wall: Select one 4.210m Base Plate (Green), one

4.210m Top Plate (Red), four Studs (Yellow) and three

Nogs. Lay out Plates and one Stud on a flat surface and

nail Stud centrally between Plates. Nail remaining Studs to

Plates using 0.778m Nogs to get the correct position. Posi-

tion Nogs centrally between Plates and nail in place. Re-

peat with second End Frame.

MK4C TIMBER FRAME