DuraVent PelletVent Instrukcja instalacji - Strona 15

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Wentylator DuraVent PelletVent. DuraVent PelletVent 16 stron. Multi-fuel venting system

exterior metal parts with high temperature,

rustproof paint. This is highly recommended,

particularly in areas near the ocean.

6. In case of a chimney fire, close all appliance

draft openings, shut off pellet appliance and

call your Fire Department. Do not use the

appliance or vent until it has been inspected

for possible damage.

7. DuraVent is not responsible for flue by-

products that might discolor roofs or walls.

Fuel: Be sure to follow the recommendations

of the appliance manufacturer for the type

of fuel to use. Vent Runs: Condensate is

more likely to form in longer vents because

the exhaust temperature cools further away

from the appliance. If the exhaust cools

to a certain point, moisture in the exhaust

condenses in the vent, which can lead to

accelerated vent corrosion. Maintain hot flue

gas temperatures. It is recommended that

the vent run inside the building envelope

or inside a chase enclosure to minimize the

vent's exposure to cold temperatures. Be sure

to follow all-applicable building codes and

the requirements of the vent and appliance

manufacturers. Appliance Operation:

Always operate your appliance in accordance

with the appliance manufacturer's

recommendations. However, operating the

appliance at its lowest setting has a greater

chance for condensate to form in the vent

due to the low exhaust temperature. In order

to help reduce condensate from forming

inside the vent system, operate the appliance

at higher temperatures when colder weather

is encountered. Higher operation settings

provide for warmer flue temperatures, which

help to keep moisture suspended in the flue

gases. Inspection and Maintenance: Be sure

to inspect the appliance and vent often to

determine if there has been any corrosion or

damage to the system. Be sure to keep the

venting system clean, including the tee cap (if

applicable).