Contemporary Controls CTRLink EISK8P-GT Instrukcja instalacji - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Przełącznik Contemporary Controls CTRLink EISK8P-GT. Contemporary Controls CTRLink EISK8P-GT 4 stron. Plug and play gigabit switching hub w/poe for automation systems

Drukuj stronę
Specifications
Electrical (Class 2 Circuits Only)
INPUT
Voltage:
48 VDC ±5% (Isolated)
Power:
62 W (all PoE ports used)
5 W (no PoE ports used)
PoE OUTPUT
Voltage:
48 VDC ±10%
Power:
12.95 W (minimum)
Environmental
Operating Temperature:
Storage Temperature:
Humidity, non-cond.:
Protection:
Functional
Compliance:
Data Rates:
Signalling:
Connectors:
Segment length: 100 m (maximum)
Network Connections
Either straight-through or crossover cables can be used to connect to a non-PoE
Ethernet device that supports Auto–MDI/X or to a PoE powered device. However,
verify that the proper polarity of the PoE power on pins 1, 2, 3, and 6 remains intact.
LED Indicators
The "Power" LED glows solid green when the switch is properly powered. To aid in
troubleshooting, each port has two LEDs. The Port 2 LED labelled "H" glows if a link
exists at 1000 Mbps (green) or at 100 Mbps (yellow). Its LED labelled "L" is normally
unlit but glows yellow if a 10 Mbps link exists. Either the "H" or "L" LEDs flash to show
activity. The LEDs of all other ports are unlabelled but work the same.
Each PoE port has an LED to indicate that the port is delivering power to a PD. The
48V LED indicates proper PoE power and the Fault LED glows red during a PoE power
fault condition.
0°C to +60°C
– 40°C to +85°C
10% to 95%
IP 30
ANSI/IEEE 802.3af
10, 100 and 1000 Mbps
10BASE-T, 100BASE-TX
and 1000BASE-T
Shielded RJ-45
Mounting
Shipping Weight
Regulatory Compliance
CE Mark; CFR 47 Part 15, Class A
UL 508, C22.2 No. 142-M1987
IEEE 802.3af
LED Indicators
Power
green
Activity/Link
green or yellow
RJ-45 Connector Pin Assignments
All Ports
Power Added
to PoE Ports
1
BI_DA+
2
BI_DA–
3
BI_DB+
48 VDC Return
4
BI_DC+
5
BI_DC–
6
BI_DB–
48 VDC Return
7
BI_DD+
8
BI_DD–
TS-35 DIN-rail
1 lb. (0.45 kg)
+48 VDC
+48 VDC