Addonics Technologies DSAEDEU Instrukcja instalacji

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Obudowa Addonics Technologies DSAEDEU. Addonics Technologies DSAEDEU 2 stron. Diamond exdrive

Drukuj stronę

Addonics

T E C H N O L O G I E S

Diamond ExDrive

DSAEDES & DIEDES

DSAEDEU & DIEDEU

User's Guide

FCC Warning Statement

This equipment has been tested and found to comply with the limits for a class B digital

device pursuant to Part 15 of the FCC rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy. If not installed and

used in accordance with the instructions, it may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If the equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment on and off, the user

is encouraged to try and correct the interference by one or more of the following

suggestions.

Reorient or relocate the receiving antenna

Increase the distance between the equipment and the receiver

Connect the equipment to a different power outlet other than the one where receiver is

connected

Consult a certified television or radio technician

Version 1.0

Hardware Installation Guide

Step 1

Use a Philips screwdriver to

turn the cover securing

screw into the "OPEN"

position.

Step 2

Slide the aluminum cover

towards the back end of the

Diamond and remove it.

Step 3

For SATA Drive

Carefully place the SATA hard drive

with the label facing up into the

Diamond enclosure. Push the hard

drive towards the back end to secure

the drive connectors onto the

Diamond enclosure's SATA

connector.