Aplast AQUAstay Instrukcje dotyczące instalacji - Strona 4

Przeglądaj online lub pobierz pdf Instrukcje dotyczące instalacji dla Podgrzewacz wody Aplast AQUAstay. Aplast AQUAstay 8 stron.

3. INSTALLATION OF TANK

3.1.

PREPARATION OF TANK

All the basic versions of tanks include a custom-made water outlet. Using a suitable double connector or reducing connector you can

connect the outlets to the desired spot. Before lowering it into the construction pit, the tank must be inspected to make sure it was

not damaged during transport and whether it appears flawless on the outside.

3.1.1. Assembly of Fittings

The tank's entry fittings differ and are adapted to your requirements. You must choose a suitable pipe and the appropriate entry seal.

The installation of the seal and the execution of a suitable opening must be carried out by a qualified individual with the tools suitable

for such a task (a hole saw, a scraper, a food-grade lubricant etc.)

3.2.

EXCAVATION OF A CONSTRUCTION PIT

NOTE: maximum depth of tank entrenchment amounts to h + 500mm. The construction pit must be excavated at a min. angle of 15º

L = Type of tank + 1m

Ø = Type of tank + 1m