Contemporary Research 232-STA Instrukcja obsługi produktu - Strona 15
Przeglądaj online lub pobierz pdf Instrukcja obsługi produktu dla Tuner TV Contemporary Research 232-STA. Contemporary Research 232-STA 18 stron. Stereo tv tuner
Również dla Contemporary Research 232-STA: Skrócona instrukcja obsługi (2 strony), Widok produktu (2 strony)
Drukuj stronę
RS-232 Cable Connections
Single Tuner
RS-232
Control Port
RS-232 wiring for control or programming should only use pins 2, 3, 5. Cables with all pins wired can
lock out front-panel programming and data communication (Pins 4 and 9 are inputs).
Multiple Tuners
Up to nine tuners can be daisy-chained from one RS-232 control port. Remember that you will need to
use the Unit# address in your programming when you control more than one tuner from the same
control port.
Set the first unit in the RS-232 chain to the highest Unit#, then wire in sequence to the last tuner in
the chain. The reason for this is that CR tuners use an intelligent data bus - the highest number tuner
receives all commands, and then passes on commands addressed to tuners with lower unit numbers.
The next tuner in the chain does the same, and so on until the last unit.
Control Port
RS-232
Control Port
Contemporary Research
Control Wiring – Single Unit
5 GND
2 RXD
3 TXD
RS-232 Wiring – Two Units
5 GND
RS-232
2 RXD
3 TXD
RS-232 Wiring – Three Units
5 GND
2 RXD
3 TXD
GND 5
TXD 3
RXD 2
Channel Up 4
Channel Down 9
GND 5
TXD 3
RXD 2
GND 5
TXD 3
RXD 2
GND 5
TXD 3
RXD 2
GND 5
TXD 3
RXD 2
GND 5
TXD 3
RXD 2
15
9-pin D-sub
female
Unit 2
9-pin D-sub
female
Unit 1
9-pin D-sub
female
Unit 3
9-pin D-sub
female
Unit 2
9-pin D-sub
female
Unit 1
9-pin D-sub
female
232-STA Stereo TV Tuner