Contender C52400 Instrukcja montażu - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Wyposażenie wnętrz Contender C52400. Contender C52400 3 stron.

Step 4: Slide in all Backs. No hardware required in this

step. Backs will sit in grooves of Divider , Top, and Left

Side. Loosening of Seat and Shelf may be needed to slide

backs along grooving in Left Side and Divider.

Step 5: Attach second Side piece

using (8) supplied Hex screws and

Allen wrench. Grooves in Right

Side overlap previously assembled

components.

For assistance, call: Customer Service 18002478465

Step 6: Set unit upright, resting edges

of Sides on floor. Tighten all screws

snugly. DO NOT OVERTIGHTEN.

DO NOT DRILL. Assembly is now

complete.

Step 5: Attach Bottom. Grooves in Bottom

fit over Backs and Divider. (4) Hex screws

and Allen wrench used in this step.