Contender C990476-101 Instrukcja montażu

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Wyposażenie wnętrz Contender C990476-101. Contender C990476-101 8 stron.

Parts:

(2) Sides

(2) Doors

Back

Top

(2) Magnets

(2) Magnetic Catches

Step 1: Step 1: Attach magnetic hardware

to underside of Top Piece (dados side) and

inside top of Doors using pre-drilled holes.

Magnets that are inside plastic case going

underneath Top piece must be facing out-

ward, away from center of Top Piece. Mag-

net Catches use a Small Screw and

Magnets use Magnet Screws.

For assistance, call: Customer Service 1-800-247-8465

C990476-101 ASSEMBLY INSTRUCTIONS

Backsplash

Bottom

Step 2: Insert edge of Bottom, with Bottom

groove facing upwards in direction of hinge,

into mortise of Side. Align Bottom groove

and Side back groove. Insert hex screws

into each of the pre-drilled holes in Side.

(14) Hex Screws

(2) Red Handles

Shelf

Phillips Head Screwdriver

Step 3: Insert edge of Shelf into mortise

of Side. Align back of Shelf flush with

front edge of Side back groove. Front

edge of shelf is rounded and when in-

serted, is edge closest to hinge. Insert

hex screws into each of the pre-drilled

holes in Side.

Allen Wrench

(16) Small Screws

(4) Magnetic Screws

(Not Included)